How To Draw Scalene Triangle In Autocad

18 Answers

Ok. the best solution which works in every software is that yous draw the kickoff line, then draw a circle whose radius equals to the length of 2nd line at the start of the first line. And repeat drawing the circle with the length of third line at the terminate of the first line.

The result is the intersection of 2 circles which you have to connect the intersection with the get-go and end of the first line.

Polygon button on the Describe panel/toolbar. In 2012 it's subconscious nether the rectangle command.

If you know the lenghts you lot tin detect the angles, or at least one angle. Information technology is simple trigonometry. From so you tin can draw the trianlge.

accept u ever used autodesk tutorials?that can help u

Mayhap the question was if you lot only know the length of the sides.
Start the Polygon tool.
Enter number of sides (iii)
Instead of picking a heart point press Due east and enter.
Enter the length of an edge and press enter.

This will only create an equilateral triangle. If you lot desire a different blazon of triangle, yous would demand to use some of the parametric constraints and dimensions.
This will permit you to constrain the line ends together and then drive the length of the lines with parametric dimensions.

At the control line blazon polygon, three, pick a centerpoint for the triangle, then choose inscribed "I" if you want to size the triangle using a circumvolve radius from point to point or circumscribed "C" using a circle from flat to apartment. Here is the text you lot can cut and paste to create a 1" radius inscribed triangle at 0,0,0.
(command "polygon" "three" "0,0,0" "I" "1")

by using polygon tool y'all tin draw the triangle. as
click on the "polygon"
enter the number of sides(3)
and pick the center signal and draw the triangle.
this will permit y'all to draw the equilateral triangle.

The parametric option and the Ehsan solution (to a higher place) is the only two possibility for this question!

if you know the exact length just describe a line west/ exact length copy & rotate it to lx deg and then mirror information technology. you have a perfect triangle due west/o going to polygon control.

just printing 'l' + 'enter push on keyboard'+ 'click on the screen' + 'move the mouse to the right of the indicate' + 'press length of the triangle' + 'press enter button on keyboard'
now press 'Esc'+ press 'l'+ 'press enter button on keyboard' + 'click on the 1st point' + 'move the mouse upward of the first point'+ 'enter the height of the triangle' + 'printing Esc on keyboard'
now press 'L' + 'press enter push button on keyboard' + 'click on the point above the ehight of the triangle' + 'at present click on the point right to the triangle' + ' at present press Esc'
thats all.......:)

Ehsan's way is the only sensible one; using polygon and parametric to construct it only makes the process longer, by all means use parametric to constrain it afterwards, if the drawing needs it.

write "polygon" in command space bottom in motorcar cad
select kickoff indicate
then type "3" ( "iii" sided triangle if y'all desire pentagon type "5")
select size exercise you lot want by mouse
or enter radius of circle
congraulation y'all brand a tri angle

u tin can use polar co-ordinate method with line command. u tin accept length and bending. thn u create triangle.
example :
L ENTER
PICK Indicate
@2<0
@2<120
@2<240.
U CREATE As well HEXAGON PENTAGON & MORE WITH THIS METHOD.

Why non just depict lines using lengths and degrees?

In Autocad 2013 and 2014,become to Draw toolbar,click polygon,enter number 3 to correspond the three sided polygon which is a triangle.Then specify the center of the triangle past clicking any where in the drawing surface area,press in for inscribe circle and ci for confining circle and press enter.When entered a triangle will shown in your drawing model,Finally just specify the radius of circumvolve by typing the required radius and press enter.Thats it.....I hoped my explanation helps..

Merely from Polygon Control>
Step 1 : Select POLYGON command.
two: Blazon number of corners and press ENTER. (a Triangle have 3 edges or corners)
3. Define the center point of object.
four. Now press "I" for inscribed circumvolve or press "c" for circuminscribed circle and press enter.
Washed

If we assume that the three sides are different sizes, the but method that will work reliably is the intersecting circle plan mentioned higher up. If, however, two of the sides are the same size, some of the other options above volition work. Information technology is important to read all of a question and empathize what is being asked before offering a solution. How oft have you engineered an elegant program only to find that the plan did non satisfy the client's requirements?